HONG KONG SAUL 
DS200TCQAF1AFA Mark VIe Control System
DS200TCQAF1AFA Product Introduction
Basic Information
Brand: GE (General Electric)
Model:DS200TCQAF1AFA
Part Number: DS200TCQAF1AFA
Series: Mark VIe Speedtronic Turbine Control System I/O Pack
Country of Origin: United States
Product Type: Discrete Input Module (Contact Input Module), also known as PDIA I/O Pack
Functional OverviewThe DS200TCQAF1AFA is a 24-channel discrete (digital) input module in the GE Mark VIe control system. Its primary function is to collect discrete signals (contact open/close signals) generated by field devices such as sensors,
switches, and relays, convert them into digital signals that can be recognized and processed by the PLC or control system CPU,
and transmit the processed data to the GE Speedtronic turbine control system or other control equipment, enabling automated control and monitoring. Key Technical Specifications
Rated Voltage: 24.0 VDC (Nominal)
Maximum Rated Voltage: 28.6 VDC
Maximum Rated Contact Input Voltage: 32 VDC
Number of Input Channels: 24 Discrete Inputs
Operating Temperature Range: -30°C to +65°C
Environmental Adaptability: Passes rigorous environmental testing, capable of long-term stable operation in harsh industrial environments Compatible Terminal Boards
The DS200TCQAF1AFA can be paired with a variety of GE terminal boards, including but not limited to:
IS200STCIH1A / IS200STCIH2A
IS200STCIH8A
IS200TBCIH2C / IS200TBCIH4C
IS400STCIH1A / IS400STCIH2A / IS400STCIH8A
IS400TBCIH2C Certifications and Safety
This module is UL certified and can be used in both hazardous and non-hazardous locations. The UL certification covers various classes and divisions, and relevant UL mark documents are available for reference.
Infrared touch screens rely on multiple pairs of infrared transmitting and receiving tubes to work. The performance and life of the infrared tubes are relatively reliable. Any object that blocks light can be used as a touch object. However, infrared touch screens use nearly 100 pairs of sensors and share peripheral circuits. , this requires that the sensor itself not only has good performance, but also requires that the “light-resistance characteristics” and “junction capacitance” of nearly 100 pairs of infrared diodes should be consistent. In practical applications, if any pair fails, it can be discovered during the power-on self-test and ignored thereafter, and replaced by adjacent infrared rays. Since each pair of infrared rays only “supervises” a narrow band of about 6mm, and Fingers are usually around 15mm thick and are not noticeable to the user. However, if there is no aging test for infrared emission tubes during the production process and there is no good quality management system, nearly 100 pairs of sensors will soon no longer be a problem of one or two pairs being “left behind”, and the overall lifespan will be difficult to guarantee. The figure below (Figure 6-2) is a schematic diagram of the infrared touch screen
Figure 6-2
The capacitive touch screen itself is actually a set of precision leakage sensors, which cannot be touched by gloved hands. Due to the use of capacitive methods, drift occurs. The capacitive touch screen will be introduced in detail in the next section. Ultrasonic touch screens include surface acoustic wave touch screens and body wave acoustic wave touch screens, both of which use electro-acoustic piezoelectric transducers as sensors. The piezoelectric transistors used in the receiving sensor and the transmitting sensor are not the same type, and the doping materials during manufacturing are slightly different. Differently, the transmitting transducer is more powerful and the receiving transducer is more sensitive. The piezoelectric transducer has a long life and stable operation. Normal operation can guarantee no problems for 10 years. After the touch screen is installed, the transducer is hidden, but care needs to be taken during transportation and installation. The exposed transducer crystal cannot be collided or squeezed. The surface acoustic wave touch screen has two pairs of sensors on the X and Y axes. It uses surface acoustic waves on the screen surface to detect finger touches. It can be said that the working surface is a layer of invisible and indestructible sound energy. It is not afraid of violent use and is most suitable for public information. Inquire.
The above has discussed some concepts in the field of touch screen technology. Of course, it is just a discussion of purely technical principles. To judge a touch screen, the technical principles alone are only part of it. To be applied to various fields, touch screens must withstand thousands of touches. Touch, the durability of the selected materials, the response speed, and whether the price is affordable are all rational ways to judge a touch screen.
Since the current touch screens based on resistive technology are low-priced and can satisfy most of them, the following focuses on the basic principles of resistive touch screens: The screen part of the resistive touch screen is a multi-layer composite film that is very compatible with the surface of the display. It consists
of a Laminated glass or plexiglass is used as the base layer, and the surface is coated with a transparent conductive layer, which is then covered with a layer of outer surface hardened, smooth and scratch-resistant plastic layer. Its inner surface is also coated with a transparent conductive layer, and the two conductive layers are There are many tiny (less than a thousandth of an inch) transparent isolation points between the layers to insulate them. As shown in Figure 6-3
There are no reviews yet.